We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.

Scientists from Finland and Denmark have demonstrated the 3D printing of thermally conductive plastic filaments which have potential applications as passive heat sinks for electronic devices. Their research has appeared in the journal Additive Manufacturing.

Study: Material extrusion additive manufacturing and experimental testing of topology-optimised passive heat sinks using a thermally-conductive plastic filament . Image Credit: Sergi Lopez Roig/Shutterstock.com

The development of innovative advanced electronics for applications such as wearable devices, battery-powered devices, and aerospace applications is a cutting-edge field. A key requirement of these applications is the need for effective and reliable cooling to avoid safety and performance issues.

Cooling systems require their components to possess several characteristics, such as low cost, ease of use, resistance to chemicals and corrosion, and a lack of electrical conductivity. Plastics have emerged as suitable materials for cooling systems. These materials perform better than metals, which carry the risk of short circuits and fires, requiring them to be electrically grounded.

Heat sinks transfer thermal energy from the system to another medium, typically a surrounding fluid flow such as air or water. However, these systems can suffer from electromagnetic interference due to their shape, which is a key problem hindering their use in the telecommunications and aerospace industries.

The advantage of using plastic materials for heat sinks is their lack of electrical conductivity and high thermal conductivity. Recognizing this advantage, recent studies have investigated the development of polymer-based materials for use in heat sinks and cooling systems for electronics devices in multiple industries.

Conventional plastics manufacture is extremely environmentally damaging, however. Traditional manufacturing approaches suffer from a lack of design freedom, prohibitive cost, carbon emissions, and generation of significant amounts of waste materials.

Additive manufacturing has several benefits over traditional material manufacturing methods which make it suitable for use in a wide range of industries, from commercial products to biomedical science, the aerospace industry, automobile industry, and construction. Additive manufacturing, also known as 3D printing, covers a wide range of techniques, such as material extrusion and light-assisted methods.

3D printing methods can produce functional device components with complex architectures due to their enhanced design freedom. By depositing materials layer by layer, 3D printing techniques produce significantly lower amounts of waste at a smaller cost compared to conventional manufacturing methods. Additionally, multi-material printing has several possibilities for innovative device and component manufacture.

Recent studies have demonstrated the suitability of additive manufacturing methods for producing elaborate plastic components with complex architectures for use in electronics cooling systems. The development of thermally conductive plastics using 3D printing methods has been reviewed extensively in recent years, providing possibilities for the future of advanced cooling systems for multiple industries.

The new paper has focused on the development of 3D-printed thermally conductive plastic filaments for novel heat sink cooling systems. Filament topology has been explored to produce high-performance passive heat sinks which exploit natural convection.

Test printing, SEM imagining, and thermal conductivity testing were employed to evaluate the filament’s thermal performance, a key parameter in cooling systems. Material extrusion was selected as the 3D printing technique in the study, and soluble support materials were used during manufacture. The resulting filaments possess a complex, optimized structural design.

Heat sinks were designed with the specific filament and process in mind, and anisotropic thermal conductivity was included in the optimization process. The study demonstrated the suitability of topology optimization to improve 3D printed passive heat sink performance.

The optimized samples produced in the research display enhanced thermal performance, thus making them suitable for passive heat sink systems. The best designs produced using topology optimization possess 10% and 20% lower thermal resistance in vertical and horizontal directions, respectively. The designs performed better than reference straight-fin heat sinks.

Measuring the material’s thermal conductivity values under anisotropic and isotropic assumptions helped to achieve the enhanced thermal performance observed in the research findings. An anisotropic thermal conductivity model optimized the heat sink’s thermal performance in the vertical direction.

On the contrary, in the horizontal direction, significant base plate distortion was caused by the anisotropic property-based design optimization method. A consequent, significant air gap between the heat source and base plate occurs due to distortion, which impairs heat transfer in the system. This severely impacts the potential cooling performance of the novel heat sink presented in the paper.

In conclusion, the study has demonstrated the suitability of additive manufacturing for producing novel plastic filament-based heat sink components for advanced electronics applications. The material extrusion process can be fully controlled. However, there are some critical challenges that need to be addressed in future research, and whilst satisfactory results were achieved with the printing parameters, these can be improved further by taking into account thermal performance.

More from AZoM: The Use of AI in Chemical Processes

Huttunan, E et al. (2022) Material extrusion additive manufacturing and experimental testing of topology-optimised passive heat sinks using a thermally-conductive plastic filament Additive Manufacturing 103123 [online, pre-proof] sciencedirect.com. Available at: https://www.sciencedirect.com/science/article/pii/S2214860422005127?via%3Dihub

Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.

Reg Davey is a freelance copywriter and editor based in Nottingham in the United Kingdom. Writing for AZoNetwork represents the coming together of various interests and fields he has been interested and involved in over the years, including Microbiology, Biomedical Sciences, and Environmental Science.

Please use one of the following formats to cite this article in your essay, paper or report:

Davey, Reginald. (2022, September 07). Investigating a Thermally-Conductive Plastic Filament for 3D Printing. AZoM. Retrieved on September 09, 2022 from https://www.azom.com/news.aspx?newsID=59946.

Davey, Reginald. "Investigating a Thermally-Conductive Plastic Filament for 3D Printing". AZoM. 09 September 2022. <https://www.azom.com/news.aspx?newsID=59946>.

Davey, Reginald. "Investigating a Thermally-Conductive Plastic Filament for 3D Printing". AZoM. https://www.azom.com/news.aspx?newsID=59946. (accessed September 09, 2022).

Davey, Reginald. 2022. Investigating a Thermally-Conductive Plastic Filament for 3D Printing. AZoM, viewed 09 September 2022, https://www.azom.com/news.aspx?newsID=59946.

Do you have a review, update or anything you would like to add to this news story?

Dave Cist, Roger Roberts and Rob Sommerfeldt

In this interview, AZoM talks to Dave Cist, Roger Roberts, and Rob Sommerfeldt from GSSI about the Pavescan RDM, MDM, and their ground penetrating radar (GPR) capabilities. They also discuss how this can aid the asphalt production and laying processes.

Following the Advanced Materials Show 2022, AZoM spoke with Cameron Day from William Blythe about the broad scope of the company and its goals for the future.

At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.

The CVD Diamond from Element Six is a high purity synthetic diamond that is used for electronic thermal management.

Discover the CNR4 Net Radiometer, a powerful tool that can measure the energy balance between short-wave and long-wave Far Infrared radiation.

The Powder Rheology Accessory expands TA Instruments’ Discovery Hybrid Rheometer (DHR) capabilities to powders, enabling characterization of behaviors during storage, dispensing, processing, and end use.

This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.

Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.

Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.

AZoM.com - An AZoNetwork Site

Owned and operated by AZoNetwork, © 2000-2022